The reusable media passes through a vibrating screen to trap large contaminants.
|
Pressure Blast Mold Cleaning System
Specifically designed for blasting, reclaiming, and clean-ing of recyclable plastic media, our direct pressure dry blast cabinet systems are completely self-contained for a dust-free, non-toxic environment.
To ensure maximum operator visibility, dust is vacuumed from the cabinet by means of a high efficiency blower located on the clean air side of the dust collector. For easy maintenance, the dust collector is equipped with an automatic/manual cartridge blow-down valve. The clean reusable media passes through a vibrating screen to trap large contaminants and, simultaneously, through a magnetic separator that filters out ferrous contaminants before being stored for reuse. Reloading of media into the pressure vessel from the storage hopper occurs automatically each time the operator releases the foot pedal depressurizing the vessel.
To provide for smooth flow of the low-density plastic, a 60° cone pressure vessel and hopper are standard. An adjustable valve controls the feeding of media into the air stream.
These durable machines are built for years of reliable service with plastic media or abrasives. The cabinet and dust collector are constructed of 11 gauge prime steel, all welded construction. A wide variety of cabinets are available.
|
|
|
Pressure Blast Sizes
|
|
|
|
Inside Cabinet
Dimensions
W x D x H
|
Floor Space Cabinet
& Dust Collector
W x D x H
|
Door
Opening
|
|
48" x 48" x 48"
|
112" x 99" x 112"
|
Swing Door
34" x 38"
Trackside
34" x 36"
|
|
60" x 60" x 60"
|
115" x 111" x 112"
|
Swing Door
44" x 48"
Trackside
44" x 46"
|
|
|
|
|
|
|
|
Features
- Pneumatic safety door interlocks
- Safety view window, gloves, flourescent lights
- Foot-controlled blasting, durable blast hose, tungsten carbide blast nozzle
- Moisture separator and pressure regulator with gauge
- Vibrating screen for large contaminants
- Air blow-off gun
- Dust collector muffler
- 1.6 cu. ft. ASME coded pressure vessel
- Starter on systems with 3 phase electricals
- Media spill tray under track extension
- Push button workcar and door with mold rack
- Automatic exhaust valve
- Roof entry of blast hose
Available Accessories
- Extrusion screw port hole
- Magnetic separators
- Operator platform
|
A cyclone separator continuously cleans and recycles the mediaand reloads the storage hopper.
|
Pressure Blast Stripping System
Specifically designed for blasting, reclaiming, and cleaning of recyclable plastic media, our direct pressure dry blast cabinet systems are completely self-contained for a dust free, non-toxic stripping environment.
To ensure maximum operator visibility, dust is vacuumed from the cabinet by means of a high efficiency blower located on the clean air side of the dust collector. For easy maintenance the dust collector is equipped with an automatic / manual cartridge blow-down valve. The clean, reusable media passes through a vibrating screen to trap large contaminants and, simultaneously, through a magnetic separator that filters out ferrous contaminants before being stored for reuse. Reloading of media into the pressure vessel from the storage hopper occurs automatically each time the operator releases the foot pedal depressurizing the vessel.
To provide for smooth flow of the low-density plastic, a 60° cone pressure vessel and hopper are standard. An adjustable valve controls the feeding of media into the air stream.
These durable machines are built for years of reliable service with plastic media or abrasives. The cabinet and dust collector are constructed of 11 gauge prime steel, all welded construction. A wide variety of cabinets are available.
|
|
|
Pressure Dry Hone Sizes
|
|
|
|
Inside Cabinet
Dimensions
W x D x H
|
Floor Space Cabinet
& Dust Collector
W x D x H
|
Door
Opening
|
|
47" x 39" x 43"
|
115" x 94" x 106"
|
Two Doors
are Standard
27" x 36"
|
|
59" x 47" x 51"
|
115" x 112" x 106"
|
Two Doors
are Standard
34" x 35"
|
|
|
|
|
|
|
|
Features
- Extrusion screw port hole
- Pneumatic safety door interlocks
- Safety view window, gloves, flourescent lights
- Foot-controlled blasting, durable blast hose, tungsten carbide blast nozzle
- 1.6 cu.ft. ASME coded pressure vessel
- Moisture separator and pressure regulator
- Vibrating screen for large contaminants
- Air blow-off gun
- Starter on systems with 3 phase electricals
- Roof entry of blast hose
- Dust collector muffler
- Automatic exhaust valve
Available Accessories
- Mobile workcars
- Turntables
- Track extensions
- Tumbler baskets
- Automatic door and workcar
- Operator platform
- Magnetic separators
|
A built in media separator employs the principle of centrifugal force to separate the reusable media from the ventilating air.
|
Basket Tumble Blast Deflashing Systems
These efficient Tumble Blasters are designed for high volume automatic tumble blasting of small parts.
The 14" barrel holds up to 1/3 cubic feet of parts, while our second model's 24" barrel holds up to 2 cubic feet of part.
Simply load barrel, close door, set timer, and turn on dust collector. Barrel turns at a slow 2 RPM, gently exposing all parts to the blast stream.
When timer expires, parts are finished and ready for unloading.
|
|
|
Tumble Blast Sizes
|
|
|
|
|
Model
|
Tumble Blaster
Specifications
|
Dust Collector
Specifications
|
MBT 1412-DC50
.33 CU.FT. Capacity
|
75"h x 48"d x 33"w
wt: 650lbs
115V/1PH electronics
(3 phase optional)
|
64"h x 22"d x 20"w
wt: 225lbs
115V/1PH electronics
|
MBT 2424-DC100
2 CU.FT. Capacity
|
75"h x 60"d x 45"w
wt: 650lbs
220V/1PH electricals (60Hz)
(3 phase optional)
|
72"h x 28"d x 20"w
wt: 350lbs
220V/1PH electrics (60Hz)
|
|
|
|
|
|
|
* Door on Right Side
† Two Doors are Standard
|
Tumble Blaster Features - MBT1412-DC/50
- 14" x 12" perforated steel barrel with unloading door
- Drawer for easy parts unloading
- Safety door interlock
- Blast gun with timer
- Heavy-duty gear motor
- 400 dust collector
Tumble Blaster Features - MBT2424-DC/100
- 24" x 24" perforated steel barrel with unloading door
- Drawer for easy parts unloading
- Safety door interlock
- Blast gun with timer
- Heavy-duty gear motor
- 800 PT dust collector
Dust Collector Features - MBT1412-DC/50
- Full size access door
- 9 tubular filter bags
- Manual bag shaker
- Removable dust drawer
- Exhaust muffler
- 0.5 HP motor
- 40 sq.ft. filter area
- 400 DFM
Dust Collector Features - MBT2424-DC/100
- Full size access door
- 12 tubular filter bags
- Manual bag shaker
- Removable dust drawer
- Exhaust muffler
- 1 HP motor
- 52 sq.ft. filter area
- 800 DFM
Recommended Options
- Variable speed basket for controlled tumbling
- Post blow down cycle, adjustable timer
- View window and lighting in cabinet
- Sealed 1/8" perforated metal work floor
- Plastic coating on basket to protect part
- RB-2000 antistat system and MBI-40 antistat
|
Dust is vacuumed from the cabinet by means of a high efficiency blower located on the clean air side of the dust collector.
|
Suction Blast
Specifically designed for blasting with plastic media and abrasives, our recycling suction blast cabinet systems are completely self-contained for a dust-free, non-toxic environment.
To ensure maximum operator visibility, dust is vacuumed from the cabinet by means of a high efficiency blower located on the clean air side of the dust collector. For easy maintenance, the dust collector is equipped with a manual bag shaker.
These durable machines are built for years of reliable service with plastic media or abrasives. The cabinet and the dust collector are constructed of heavy duty 11 gauge steel, all welded construction. A wide variety of cabinets are available.
|
|
|
Suction Dry Hone Sizes
|
|
|
|
Inside Cabinet
Dimensions
W x D x H
|
Floor Space Cabinet
& Dust Collector
W x D x H
|
Door
Opening
|
|
24" x 24" x 24"
|
30" x 40" x 89"
|
20" x 20"*
|
|
36" x 30" x 30"
|
40" x 50" x 89"
|
26" x 26"*
|
|
48" x 30" x 30"
|
50" x 80" x 89"
|
26" x 26"+
|
|
48" x 36" x 36"
|
50" x 72" x 89"
|
32" x 32"+
|
|
48" x 48" x 48"
|
50" x 72" x 89"
|
44" x 44"+
|
|
60" x 36" x 36"
|
64" x 50" x 96"
|
32" x 32"+
|
|
72" x 36" x 36"
|
80" x 95" x 98"
|
32" x 32"+
|
|
96" x 36" x 36"
|
100" x 95" x 108"
|
32" x 32"+
|
|
Custom Sizing Available
|
|
|
|
|
|
|
* Door on Right Side
† Two Doors are Standard
|
Features
- Cyclone separator
- Pressure regulator, gauge, moisture separator and movable foot valve
- Large side door entry for loading and unloading; fully gasketed with positive lever lock
- Heavy-duty rubber blasting gloves
- Shatter-proof window mounted in rubber-sealed frame
- Heavy gauge formed steel legs
- Continuous weldment, no rivets or spot welding
- Easy slide dust drawer
- Drain plug for quick media change
- Air blow-off gun
- Light weight, easy to handle suction gun with ceramic or tungsten carbide blast nozzle
- Expanded metal work table
|
|
